SOLUBLE CUTTING OIL

United Soluble Cutting Oil series encompasses both high oil content and low oil content products. High oil content products form a very stable milky white emulsion when mixed with water. Low oil content products provide excellent bio-stability and hence extended coolant life without compromising other performance. Both types are fortified with antimicrobial agents and offers excellent rust protection and high heat absorbing characteristics. Products are available ranging from light to heavy severity machining operations.
  • UNIKOOL 2290 11351

    UNIKOOL 2290

    UNIKOOL 2290 is a low-oil content long life semi-synthetic metalworking coolant formulated for grinding, drilling, forming and various other heavy duty applications. It is suitable for machining a wide variety of materials and is applicable for both ferrous and non-ferrous based materials, including stainless steels.

  • UNIKOOL 2270 11350

    UNIKOOL 2270

    UNIKOOL 2270 is a chlorine-free low-oil content long life semi-synthetic metalworking coolant formulated for grinding, drilling, forming and reaming applications. It is suitable for machining a wide variety of materials and is applicable for both ferrous and non-ferrous based materials, including stainless steels.

  • UNICOOL BLU 11349

    UNICOOL BLU

    UNICOOL BLU is a biostable, semi-synthetic emulsifiable metalworking fluid. It is free of Amines, Triazine, Nitrites, Phenols, Chlorine and PTBBA that will reduce to a minimum for skin sensitive. It is suitable for machining a wide variety of materials; from non-ferrous aluminium, copper, brass to ferrous metals like free cutting steel and stainless steel.

  • UNIGRIND S2 11348

    UNIGRIND S2

    United Unigrind Synthetic 2 is a biostable, fully synthetic grinding fluid with high levels of corrosion protection at low concentrations and possessing extremely good wheel flushing performance. Due to its unique formulation, it combines a nitrite free composition with low foaming tendency and ability to remain clear and clean in the presense of tramp oil.

    It is free from Nitrites, Phenols, Chlorine and PTBBA. When mixed with water, it gives a fluorescent green solution that is vital for good grinding. It is developed for a wide variety of materials including cast iron, mild and stainless steels and non-ferrous materials.

  • UNISOL EP 2 11347

    UNISOL EP 2

    UNISOL EP2 is a stable soluble semi synthetic cutting fluid designed for use on a wide variety of materials including cast iron, mild steels, stainless steels and other difficult alloys. It is also suitable for water qualities with hardness values ranging between 50 to 350-ppm calcium and has low foaming tendency. UNISOL EP2 is free from Nitrites, PTBBA and Phenols.

  • UNISOL-P 11346

    UNISOL-P

    United UNISOL-P Soluble Cutting Oil is recommended for light to moderate duty machining operations on all ferrous and non-ferrous metals except magnesium. It will find use in machining, sawing, drilling, milling and turning. It is ideal for grinding due to its superior wetting and cooling properties.


    Typical dilution ratios with water range from 1:10 for milling and turning to 1:40 for grinding.