• UNIGRIND S2 11348

    UNIGRIND S2

    United Unigrind Synthetic 2 is a biostable, fully synthetic grinding fluid with high levels of corrosion protection at low concentrations and possessing extremely good wheel flushing performance. Due to its unique formulation, it combines a nitrite free composition with low foaming tendency and ability to remain clear and clean in the presense of tramp oil.

    It is free from Nitrites, Phenols, Chlorine and PTBBA. When mixed with water, it gives a fluorescent green solution that is vital for good grinding. It is developed for a wide variety of materials including cast iron, mild and stainless steels and non-ferrous materials.

  • UNISOL EP 2 11347

    UNISOL EP 2

    UNISOL EP2 is a stable soluble semi synthetic cutting fluid designed for use on a wide variety of materials including cast iron, mild steels, stainless steels and other difficult alloys. It is also suitable for water qualities with hardness values ranging between 50 to 350-ppm calcium and has low foaming tendency. UNISOL EP2 is free from Nitrites, PTBBA and Phenols.

  • UNISOL-P 11346

    UNISOL-P

    United UNISOL-P Soluble Cutting Oil is recommended for light to moderate duty machining operations on all ferrous and non-ferrous metals except magnesium. It will find use in machining, sawing, drilling, milling and turning. It is ideal for grinding due to its superior wetting and cooling properties.


    Typical dilution ratios with water range from 1:10 for milling and turning to 1:40 for grinding.

  • GLYCOL BRAKE FLUID DOT 3 11345

    GLYCOL BRAKE FLUID DOT 3

    United Glycol Brake Fluid DOT 3 is suitable for use in both disc and drum type brake systems, engineered for that critical link between the brake pedal and the brakes. It is formulated by a high quality glycol and glycol ether fluid, designed to function over wide temperature and humidity ranges.

  • UNINET MP 25 11343

    UNINET MP 25

    UNINET MP 25 is a multi-purpose neat cutting oil blended with an additive that provides a synergistic combination between chlorinated, sulfurized EP and esters.

    It is suitable for medium to heavy duty tapping and deep drilling processes. Formulated with highly refined mineral base stock, the combination of EP and lubricity additives provide a stable lubricating film required between the tool and metal surface. 

     
  • UNINET XCUT 2 11342

    UNINET XCUT 2

    UNINET XCUT 2 is a chlorine-free, low misting neat cutting oil developed to meet the heavy duty demanding machining processes such as deep hole drilling, threading, tapping, milling, gear shaping and broaching. It is blended with a proprietary high polarity additive that forms a thermally stable boundary lubricating film on the metal surfaces. UNINET XCUT 2 exhibits high synergistic Anti-wear effects when combined with our proprietary sulfurized EP additives.

  • UNINET 88 CP 11341

    UNINET 88 CP

    UNINET 88 CP is recommended for heavy duty machining processes such as drilling, threading, tapping, milling, gear shaping and broaching in multi-spindle auto-lathe operations. It is formulated with high level of polar additives and active sulfur, with the objective of machining hard metals such as stainless steel. It is not suitable for machining of non-ferrous or yellow metals.

  • UNINET CS 11340

    UNINET CS

    United UNINET CS is specially developed for heavy duty machining processes such as threading, tapping, milling and gear shaping. It is particularly suitable and recommended for the harder-to-machine high alloyed steels. It is formulated with high level of synthetic lubricity as well as sulfurized ester and may not be suitable for machining of non-ferrous or yellow metals.

  • UNINET DH 11339

    UNINET DH

    United UNINET CS is specially developed for heavy duty machining processes such as threading, tapping, milling and gear shaping. It is particularly suitable and recommended for the harder-to-machine high alloyed steels. It is formulated with high level of synthetic lubricity as well as sulfurized ester and may not be suitable for machining of non-ferrous or yellow metals.

     
  • UNINET TD 11338

    UNINET TD

    UNINET TD is formulated for tapping, deep hole drilling and threading of hard materials such as high nickel/chromium content stainless steel. It provides a stable lubricating film required between the tools and metal surface. The lighter viscosity assists in the flushing of work finish as well as precision.

    Besides tapping operations, UNINET TD is also recommended for thread rolling and gear cutting operations on all ferrous metals.