FORMING OIL

United Uniform and Unidraw series offers a wide selection of products for applications ranging from heavy duty broaching, cold heading or deep drawing to light stamping process. Products also range from very low viscosity with self-evaporating properties that leaves minimum film on components to very high viscosity containing high levels of extreme pressure additives to prevent tears and extend die life.
  • UNIFORM FBH 100 11355

    UNIFORM FBH 100

    UNIFORM FBH 100 is developed with highly refined mineral oil for the metal forming processes such as drawing, stamping and punching. It is formulated with a chlorinated additive to provide a stable lubricating film required in the forming of metals as well as acting as an anti-rust preservative. The heavy treat-rate of EP additives ensures sufficient protection to the form tool, resulting in a high standard of work finish as well as precision.

    Due to the presence of active sulfur, UNIFORM FBH 100 is suitable for ferrous materials but is NOT recommended for the machining of copper, brass or bronze alloys.

  • UNIDRAW NP 35 11354

    UNIDRAW NP 35

    UNIDRAW NP 35 is developed with highly refined mineral oil for the metal forming processes such as drawing, stamping and punching. It is an inactive ester-based lubricant that is fortified with chlorinated additive to provide a stable lubricating film required in the forming of metals. The heavy treat-rate of EP additives ensures sufficient protection to the form tool, resulting in high standard of work finish as well as precision.

    Besides metal forming, UNIDRAW NP 35 is recommended for all steel, stainless as well as non-ferrous materials.

     
  • UNIDRAW NCNP 68 11353

    UNIDRAW NCNP 68

    UNIDRAW NCNP 68 is developed with a mixture of highly refined paraffinic mineral oil and natural ester for the metal forming processes such as drawing, stamping and punching. It is a natural oil based lubricant that provides a stable lubricating film required in the forming of metals as well as acting as an anti-rust preservative. Enhanced with a heavy treat-rate of non-sulfur and non-chlorine EP additives ensures sufficient protection to the tool, resulting in excellent finish on the work piece.

    Besides metal forming, UNIDRAW NCNP 68 is recommended for all steel, stainless as well as non-ferrous materials.

  • UNIDRAW FES 40 11352

    UNIDRAW FES 40

    UNIDRAW FES 40 is a low viscosity, solvent based fast evaporating fluid for use in light to medium duty stamping and punching applications. This product has high level of lubricity and offers excellent finishing to the pressed metals without leaving any residue or oily film on the finished components. The fluid is virtually colorless and is most suitable for forming of copper, aluminum and light sheet metal. It can be used for both ferrous and non-ferrous metals and will not stain the material.